Sea-Doo GTI GTX RXP RXT Wake Pro SE Rear Bumper – Set of 2 (Ref. 291001571 / 291002244)
€46,50 EUR
Skip to product information
Sea-Doo GTI GTX RXP RXT Wake Pro SE Rear Bumper – Set of 2 (Ref. 291001571 / 291002244)
€46,50 EUR
Replacement Rear Bumpers – Sea-Doo GTI / GTX / RXP / RXT / Wake Pro / SE
The rear corner bumpers of your Sea-Doo jet ski protect the hull during docking maneuvers and absorb everyday impacts. Exposed to UV rays, saltwater, and repeated impacts, they eventually crack or deform. This set of 2 replacement rear bumpers is designed to perfectly fit the original mounting points – no modifications or cutting required.
⚠️ Quality aftermarket part – not OEM BRP, manufactured to original specifications for optimal compatibility.
Features
- Contents: 2 x rear corner bumpers
- Color: Black
- Material: High-strength plastic (impact and corrosion resistant)
- Cross references: 291002244 — 291000999 — 291001571 — 291001304 — 291001505
- Condition: New
Compatibility
This set is compatible with the following Sea-Doo models:
- Sea-Doo XP 1997, 2000–2002
- Sea-Doo XP DI 2003–2004
- Sea-Doo XP Limited 1998–1999
- Sea-Doo GTI 1998–2005 (GTI / GTI LE / GTI LE RFI)
- Sea-Doo GTI 2006–2010 (GTI STD / SE / SE 130 / SE 155 / Rental 130 / 4-TEC SE NA)
- Sea-Doo GTX Limited 1998–1999 / GTX RFI 1998–2002
- Sea-Doo GSX Limited 1999
- Sea-Doo GS 1999–2001
- Sea-Doo GTX DI 2000–2003 / GTX 4-TEC 2003–2006
- Sea-Doo GTX LTD BVIC 2007 / GTX STD & Wake 2007
- Sea-Doo GTX 155 2008–2009 / GTX 215 2008–2009 / GTX LTD 215 2008
- Sea-Doo LRV 2000–2001
- Sea-Doo RX 2000–2002 / RX DI 2000–2003
- Sea-Doo RXP BVIC & NA 2007 / RXP 155 2008 / RXP 215 2008–2009 / RXP-X 255 2008–2011
- Sea-Doo RXT BVIC 2007 / RXT 215 2008–2009 / RXT-X 255 2008–2011
- Sea-Doo Wake 155 2008–2010 / Wake 215 2008 / Wake Pro 215 2009
- Sea-Doo GTS Pro 130 2011
💡 Tip: check your serial number before ordering to confirm compatibility with your exact model year.
Installation
Replacement is accessible to any do-it-yourself owner. The bumpers attach to the original anchor points – no drilling or modification of the hull is necessary. Allow approximately 15 to 20 minutes per side.
📚 Need a step-by-step guide? Check out our article: How to replace the rear bumpers on your Sea-Doo (XP, GTX, RXP, RXT, Wake).
Important Notes
- Dimensions are manually measured – slight tolerance is possible (± 1–3 cm).
- The shade may vary slightly depending on your screen display settings.
- Aftermarket replacement part – not OEM BRP/Sea-Doo.
