Description

This flush kit allows you to connect a freshwater hose to a compatible flush port on the relevant Sea-Doo models. The set includes a quick-release fitting with a sliding collar and an adapter, depending on the configuration shown. It makes it easier to connect the hose when performing post-ride maintenance, without replacing your machine's own flushing procedure.

Technical Specifications

OEM reference: not applicable.
Type: quick-release kit for flush hose.
Condition: new, adaptable accessory.
Packaging: 1 sliding female fitting + 1 male fitting.
Fitting thread and diameter: standard, "GARDENA" type
Material: Plastic
Recorded weight: 70 g.
Regulated substances: no substances of concern declared by the supplier.
Installation: tender or jet ski flush port.

Compatibility

Sea-Doo: listed applications from 1997 to 2011, on machines equipped with a compatible rear flush system. The 1999 and 2000 GTS models are excluded.

This list does not confirm every model family for the entire period; in particular, the SPI designation must be checked according to the year and the port actually present.

GTX / GTX 4-TEC: 1997–2011
GTX iS / Limited iS: 2009–2011
SPX: 1997–1999,
XP / XP Limited: 1997–2002
XP DI: 2003–2004
GTI / GTI 4-TEC: 1997–2011
GS / GSX / GSX Limited / GSX RFI: 1997–2001.
LRV: 2000–2003.
RXT / RXT-X: 2005–2011.
RXP / RXP-X: 2004–2011.
GTS: 1997–1998, 2001 and 2011. (1999 and 2000 excluded)
SPI / other DI versions: year and flush port to be confirmed.

Kawasaki four-stroke with rear flush: 1996–2011, according to the supplier's listing, without a model list. This general indication is not a validation of every model or year: check the port and your machine's manual before ordering.

Sea-Doo filters group together independent models and years. They do not certify all their combinations and do not represent the specific exclusion of the 1999–2000 GTS models.

⚠️ Always check your serial number (VIN) and the original OEM reference before ordering to confirm the exact compatibility with your model.

Why Replace the Flush Fitting?

A cracked fitting, a deteriorated seal, or a jammed mechanism can cause a leak or prevent the hose from being connected correctly. A fitting in good condition makes it easier to perform the freshwater flush recommended by the manufacturer to limit the accumulation of salt and deposits in the so-called "sea water" circuit.